Exporting Certificates - HP MSR2000 Configuration Manual

After you change the storage path for the certificates or CRLs, the certificate files (with the file
extension .cer or .p12) and CRL files (with the extension .crl) in the original path are moved to the new
path.
To specify the storage path for the certificates and CRLs:
Task
Specify the storage path for
the certificates and CRLs.

Exporting certificates

IMPORTANT:
To export all certificates in the PKCS12 format, the PKI domain must have at least one local certificate.
Otherwise, the export operation fails.
To back up or import certificates, you can export the CA certificate and the local certificates in a PKI
domain to local files or display them on a terminal.
When you export a local certificate with the RSA key pair, the name of the target file might not be the
same as specified in the command. It depends on the purpose of the key pair of the certificate.
To export certificates:
Step
1. Enter system view.
2. Export certificates.
Command
pki storage { certificates |
crls } dir-path
Command
system-view
•
Export certificates in DER format:
pki export domain domain-name der { all |
ca | local } filename filename
•
Export certificates in PKCS12 format:
pki export domain domain-name p12 { all |
local } passphrase p12passwordstring
filename filename
•
Export certificates in PEM format:
pki export domain domain-name pem { { all |
local } [ { 3des-cbc | aes-128-cbc |
aes-192-cbc | aes-256-cbc | des-cbc }
pempasswordstring ] | ca } [ filename
filename ]
111
Remarks
By default, the storage path for the certificates
and CRLs is the PKI directory on the storage
media of the device.
For MSR4000 series routers, you must specify
a path on the current MPU rather than on other
MPUs.
Remarks
N/A
Configure at least one
command.
If you do not specify a file name
when you export a certificate in
PEM format, the certificate is
displayed on the terminal.