Displaying And Maintaining Connection Limits - HP MSR2000 Configuration Manual

Step
1. Enter system view.
2. Enter interface view.
3. Apply a connection limit
policy to an interface.
Step
1. Enter system view.
2. Apply a connection limit
policy globally.

Displaying and maintaining connection limits

Execute display commands in any view and reset commands in user view.
Task
Display the connection limit policy
information.
Display the connection limit statistics
globally or on an interface
(MSR2000/MSR3000).
Display the connection limit statistics
globally or on an interface (MSR4000).
Display statistics about IPv6 connections
matching connection limit rules globally
or on an interface
(MSR2000/MSR3000).
Display statistics about IPv6 connections
matching connection limit rules globally
or on an interface (MSR4000).
Clear the connection limit statistics
globally or on an interface
(MSR2000/MSR3000).
Command
system-view
interface interface-type
interface-number
connection-limit apply
{ ipv6-policy | policy } policy-id
Command
system-view
connection-limit apply global
{ ipv6-policy | policy } policy-id
Command
display connection-limit { ipv6-policy | policy } { all | policy-id }
display connection-limit statistics { global | interface interface-type
interface-number }
display connection-limit statistics { global | interface interface-type
interface-number } [ slot slot-number ]
display connection-limit { ipv6-stat-nodes | stat-nodes } { global |
interface interface-type interface-number } [ destination
destination-ip | service-port port-number | source source-ip ] *
[ count ]
display connection-limit { ipv6-stat-nodes | stat-nodes } { global |
interface interface-type interface-number } [ slot slot-number ]
[ destination destination-ip | service-port port-number | source
source-ip ] * [ count ]
reset connection-limit statistics { global | interface interface-type
interface-number }
268
Remarks
N/A
N/A
By default, no connection limit is
applied to an interface.
Only one IPv4 or IPv6 connection
limit policy can be applied to an
interface. A new IPv4 or IPv6
connection limit policy overwrites
an old policy.
Remarks
N/A
By default, no connection limit is
applied globally.
Up to one IPv4 and one IPv6
connection limit policy can be
applied globally. A new IPv4 or
IPv6 connection limit policy
overwrites the old one.