HP MSR2000 Configuration Manual page 345

[RouterA-radius-rs1] nas-ip 3.3.0.3
[RouterA-radius-rs1] quit
# Enable RADIUS session control.
[RouterA] radius session-control enable
2. Configure an authentication domain:
# Create an ISP domain named dm1 and enter its view.
[RouterA] domain dm1
# Configure AAA methods for the ISP domain.
[RouterA-isp-dm1] authentication portal radius-scheme rs1
[RouterA-isp-dm1] authorization portal radius-scheme rs1
[RouterA-isp-dm1] accounting portal radius-scheme rs1
[RouterA-isp-dm1] quit
# Configure domain dm1 as the default ISP domain. If a user enters the username without the ISP
domain name at login, the authentication and accounting methods of the default domain are used
for the user.
[RouterA] domain default enable dm1
3. Configure portal authentication:
# Configure a portal authentication server.
[RouterA] portal server newpt
[RouterA-portal-server-newpt] ip 192.168.0.111 vpn-instance vpn3 key simple portal
[RouterA-portal-server-newpt] port 50100
[RouterA-portal-server-newpt] quit
# Configure a portal Web server.
[RouterA] portal web-server newpt
[RouterA-portal-websvr-newpt] url http://192.168.0.111:8080/portal
[RouterA-portal-websvr-newpt] vpn-instance vpn3
[RouterA-portal-websvr-newpt] quit
# Enable cross-subnet portal authentication on interface Ethernet1/1.
[RouterA] interface ethernet 1/1
[RouterA–Ethernet1/1] portal enable method layer3
# Reference the portal Web server newpt on Ethernet1/1.
[RouterA–Ethernet1/1] portal apply web-server newpt
# Configure the BAS-IP as 3.3.0.3 for portal packets sent from Ethernet 1/1 to the portal
authentication server.
[RouterA–Ethernet1/1] portal bas-ip 3.3.0.3
[RouterA–Ethernet1/1] quit
Verifying the configuration
Verify the portal configuration by executing the display portal interface command.
After the user passes authentication, execute the display portal user command to display the portal user
information.
[RouterA] display portal user all
Total portal users: 1
Username: abc
Portal server: newpt
State: Online
334