HP MSR2000 Configuration Manual page 215

Hide thumbs Also See for MSR2000:
Table of Contents

Advertisement

13
Flags:
RD--READY RL--REPLACED FD-FADING
[DeviceA] display ike sa verbose
-----------------------------------------------
Connection ID: 13
Outside VPN:
Inside VPN:
Profile: profile1
Transmitting entity: Initiator
-----------------------------------------------
Local IP: 1.1.1.1
Local ID type: FQDN
Local ID: www.devicea.com
Remote IP: 2.2.2.2
Remote ID type: IPV4_ADDR
Remote ID: 2.2.2.2
Authentication-method: PRE-SHARED-KEY
Authentication-algorithm: MD5
Encryption-algorithm: 3DES-CBC
Life duration(sec): 86400
Remaining key duration(sec): 84565
Exchange-mode: Aggressive
Diffie-Hellman group: Group 1
NAT traversal: Detected
# Display the IPsec SAs generated on Device A.
[DeviceA] display ipsec sa
-------------------------------
Interface: Ethernet1/1
-------------------------------
-----------------------------
IPsec policy: policy1
Sequence number: 1
Mode: isakmp
-----------------------------
Tunnel id: 0
Encapsulation mode: tunnel
Perfect forward secrecy:
Path MTU: 1435
Tunnel:
local
address: 1.1.1.1
remote address: 2.2.2.2
Flow:
sour addr: 10.1.1.0/255.255.255.0
2.2.2.2
204
RD
IPSEC
port: 0
protocol: IP

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msr3000Msr4000

Table of Contents