Figure 91 Adding a portal device
4.
Associate the portal device with the IP address group:
a.
As shown in
Figure
device NAS to enter the port group configuration page.
b.
Click Add to enter the page shown in
c.
Enter the port group name.
d.
Select the configured IP address group.
The IP address used by the user to access the network must be within this IP address group.
e.
Use the default settings for other parameters.
f.
Click OK.
Figure 92 Device list
Figure 93 Adding a port group
5.
Select User Access Manager > Service Parameters > Validate from the navigation tree to validate
the configurations.
92, click the icon in the Port Group Information Management column of
Figure
314
93.