Printer Test - Toshiba PORTEGE R200 Maintenance Manual

3 Tests and Diagnostics

3.11 Printer Test

CAUTION: Printer Test is not supported for this model.
To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and
follow the directions on the screen.
NOTE: An IBM compatible printer must be connected to the system to execute this test.
The following message will appear, after selecting the subtest 01 to 03 of the printer test:
The printer I/O port address is specified by the XXXXh number. The computer supports
three printer channels. Select the printer channel number, and press Enter to execute the
selected subtest.
Subtest 01
3-24
Downloaded from www.Manualslib.com
Also, printer port wraparound connector must be connected.
channel#1 = XXXXh
channel#2 = XXXXh
channel#3 = XXXXh
Select the channel number (1-3) ?
Ripple Pattern
This subtest prints characters for codes 20h through 7Eh line-by-line while
shifting one character to the left at the beginning of each new line.
[CONFIDENTIAL]
manuals search engine
PORTEGE R200 Maintenance Manual (960-519)

3.11 Printer Test