Toshiba PORTEGE R200 Maintenance Manual page 201

3.29 SETUP
Moving Within the SETUP Menu and Changing Values
1. Press
2. Press either the Space bar or Back Space to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
2. To make other changes, press N. Repeat the steps above.
3. To accept the changes, press Y.
NOTE: You can press Esc to quit at any time without saving changes. SETUP asks you
The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press Home.
2. Press End and then press Y to accept the factory preset settings.
NOTE: When you execute the default setting, the following settings are not changed:
PORTEGE R200 Maintenance Manual (960-519)
Downloaded from www.Manualslib.com
to move between the two columns. Press ↑ and ↓ to move between
and
items in a column. Press Fn+↑ (PgUp) and Fn + ↓ (PgDn) to move between the
two pages.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
to confirm that you do not want to save your changes. When SETUP is displayed
at the next time, the current configuration appears.
HDD Mode
Password
Write Policy in the CPU Cache
manuals search engine
3 Tests and Diagnostics
[CONFIDENTIAL] 3-93