Toshiba PORTEGE R200 Maintenance Manual page 263

4.24 FL inverter/LCD unit
Installing the FL inverter/LCD unit
To install the FL inverter/LCD unit, follow the steps below and refer to Figure 4-31 and 4-32.
1. Set the LCD unit to the display cover in place.
2. Connect the LCD cable to the LCD unit and stick the glass tape on the LCD cable.
3. Connect the two cables to the both sides of the connector on the FL inverter and
4. Secure the FL inverter with the following screw and stick the insulator.
PORTEGE R200 Maintenance Manual (960-519)
Downloaded from www.Manualslib.com
install the FL inverter according to the guide.
•
M2×3C
manuals search engine
S-FLAT HEAD screw
4 Replacement Procedures
x1
[CONFIDENTIAL] 4-47