Toshiba PORTEGE R200 Maintenance Manual page 209

3.29 SETUP
10. Drives I/O
11. PCI Bus
12. Security controller
PORTEGE R200 Maintenance Manual (960-519)
Downloaded from www.Manualslib.com
This option displays the address and interrupts level for hard disk drive. It is for
information only and cannot be changed.
Built-in HDD = Primary IDE(1F0H/IRQ14)
This item displays the interrupt level for the Card Bus. It is for information only and
cannot be changed.
PCI Bus = IRQ10, IRQ11
(a) TPM
Disables the security controller called TPM (Trusted Platform Module).
When the cursor is on the Enable (Disable) and the Space is pressed,
message is displayed and the PC waits Y or N key input by the user.
When Y is pressed, it is sets to Enable (Disable). After changing, the cursor
could not be moved on the TPM tem. This option can be changed after
rebooting.
Disabled
Enabled
(b) Clear TPM Owner
This is not displayed when the TPM is set to Disabled. This is executed,
when the PC is disposed or the owner of the PC changes.
When the cursor is on this item and the Space is pressed, message is
displayed and the PC waits Y, E, S and Enter key inputs by the user.
When Y, E, S and Enter keys are pressed, the data is disposed.
After changing, the display of TPM item is changed to Disabled and this item
becomes not displayed and the cursor could not be moved on the TPM item.
manuals search engine
Disables the TPM. (Default)
Enables the TPM.
[CONFIDENTIAL]
3 Tests and Diagnostics
3-101