Fingerprint Sensor - Toshiba PORTEGE R200 Maintenance Manual

2 Troubleshooting

2.16 Fingerprint sensor

CAUTION: To delete the account for confirming the fingerprint operation, it is necessary
To check if the Fingerprint sensor work correctly or not, follow the troubleshooting
procedures below as instructed.
When failed in Procedure 1 to Procedure 3, execute Procedure 4.
CAUTION: Scan your finger shown below.
2-56
Downloaded from www.Manualslib.com
to log on by the account with the management authority. If the password has
been set to log on, ask the Log-ON password to the user.
Procedure 1: Setting Windows Log-ON password
Procedure 2: Registration of fingerprint
Procedure 3: Authentication of fingerprint
Procedure 4: Connector Check and Replacement Check
1. Put your finger in parallel to the sensor.
2. Put your finger on the centerline of the sensor.
3. Make sure the first joint of your finger is on the sensor.
4. Slide slowly your finger from the first joint to fingertip at constant speed.
When not recognized, adjust the speed.
[CONFIDENTIAL]
manuals search engine
Fingerprint
sensor
PORTEGE R200 Maintenance Manual (960-519)
2.16 Fingerprint sensor
Fingerprint
sensor