Toshiba PORTEGE R200 Maintenance Manual page 242

4 Replacement Procedures
5. Remove the following screws and battery latch assembly.
Installing the Cover assembly/Battery latch assembly
To install the cover assembly/battery latch assembly, follow the steps below and refer to
Figure 4-13 to 4-15.
1. Install the battery latch assembly and fix it with the following screws.
2. Install the cover assembly to the base assembly and secure it with the following
3. Turn over the computer and secure the following screws.
4-26
Downloaded from www.Manualslib.com
•
M2×2.5B S-FLAT HEAD screw
M2×2.5B S-FLAT HEAD
Battery latch assembly
Figure 4-15 Removing the battery latch assembly
•
M2×2.5B S-FLAT HEAD screw
screws.
•
M2×4B
•
M2×4S
•
M2×3S
[CONFIDENTIAL]
manuals search engine
4.9 Cover assembly/Battery latch assembly
S-FLAT HEAD screw
BIND screw
S-FLAT HEAD screw
PORTEGE R200 Maintenance Manual (960-519)
x3
M2×2.5B S-FLAT HEAD
x3
x2
x13 ("4" in the figure 4-13)
x1 ("3" in the figure 4-13)