Floppy Disk Test - Toshiba PORTEGE R200 Maintenance Manual

3 Tests and Diagnostics

3.10 Floppy Disk Test

CAUTION: Before running the floppy disk test, prepare a formatted work disk. Remove
To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press
Enter and follow the directions displayed on the screen.
1. The following message will appear. Select the media mode and start track to be tested
and press Enter.
2. The Floppy Disk test contains five subtests that test the FDD.
The floppy disk test menu will appear after you select FDD test parameters.
3-22
Downloaded from www.Manualslib.com
the Diagnostics Disk and insert the work disk into the FDD because the
contents of the floppy disk will be erased.
Test start track
FLOPPY DISK
SUB-TEST : XX
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS : XXXXXX STATUS
SUB-TEST MENU :
01 - Sequential read
02 - Sequential read/write
03 - Random address/data
04 - Write specified address
05 - Read specified address
99 - Exit to DIAGNOSTIC TEST MENU
[CONFIDENTIAL]
manuals search engine
(Enter:0/dd:00-79)?
XXXXXXX XXX DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] :
[Ctrl]+[C]
ERROR COUNT
READ DATA
: XXX
PORTEGE R200 Maintenance Manual (960-519)

3.10 Floppy Disk Test

test end
: key stop
: XXXXX
: XX