Printer Test - Toshiba T3300SL Maintenance Manual

3.9

Printer Test

To execute the Printer Test, type 6 from the DIAGNOSTIC TEST MENU, press Enter, and follow
the directions displayed on the screen. The Printer Test contains three subtests that test the printer
output connected to the T3300SL. The following messages will appear after selecting the Printer
Test from the DIAGNOSTIC TEST MENU. Answer each of the following questions with an
appropriate response to execute the test.
CAUTION: An IBM compatible printer must be connected to the system in order to execute
this test. Make sure the setup option External FDD/PRT is set to Printer.
The following message will appear when the Printer Test is selected.
channel#1 = xxxxh
channel#2 = xxxxh
channel#3 = xxxxh
Select the channel number (1-3) ?
The printer I/O port address is specified by the xxxxh number. The T3300SL supports three
printer channels. Select the printer channel number and press Enter to execute the selected subtest.
Subtest 01 Ripple Pattern
This subtest prints characters for codes 20h through 7Eh line by line while shifting one
character to the left at the beginning of each new line.
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklm
!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmn
"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmno
#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnop
$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnopq
%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnopqr
&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnopqrs
'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrst
()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnopqrstu
)*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnopqrstuv
*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_'abcdefghijklmnopqrstuvw
3-24