Toshiba PORTEGE R200 Maintenance Manual page 238

4 Replacement Procedures
2. Disconnect the touch pad cable from the connector CN3240 on the system board.
3. Remove the following screws fixing the touch pad assembly.
4. Remove the touch pad assembly from the palm rest while releasing the adhesive
5. Disconnect the touch pad cable from the connector on the touch pad assembly.
4-22
Downloaded from www.Manualslib.com
•
M2×3C
portion.
Touch pad cable
CN3240
Figure 4-12 Removing the touch pad
[CONFIDENTIAL]
manuals search engine
S-FLAT HEAD screw
Touch pad assembly
PORTEGE R200 Maintenance Manual (960-519)
4.8 Touch pad
x2
M2×3C S-FLAT HEAD