4 Replacement Procedures
4.2
Removing the battery pack
To remove the battery pack, follow the steps below and refer to Figure 4-1.
CAUTION: Take care not to short circuit the terminals when removing the battery pack.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices from the computer.
3. Turn the computer upside down.
4. Slide the battery latch in the direction indicated by the arrow and insert your finger
NOTE: Dispose of the used battery pack in accordance with the laws and ordinances of
4-8
Downloaded from
www.Manualslib.com
Battery pack
Similarly, do not drop, knock, scratch, disassemble, twist, or bend the
battery pack.
to the slot to lift up the battery pack.
Figure 4-1 Removing the battery pack
your local authority.
[CONFIDENTIAL]
manuals search engine
4.2 Battery pack
Battery latch
Battery pack
PORTEGE R200 Maintenance Manual (960-519)