4 Replacement Procedures
4.17 HD FPC
Removing the HD FPC
To remove the HD FPC, follow the steps below and refer to Figure 4-24.
1. Peel off the glass tape and disconnect the HD FPC from the connector CN1800 on
Installing the HD FPC
To install the HD FPC, follow the steps below and refer to Figure 4-24.
1. Connect the HD FPC to the connector CN1800 on the system board and secure it
4-36
Downloaded from
www.Manualslib.com
the system board.
Glass tape
CN1800
Figure 4-24 Removing the HD FPC
with the glass tape.
[CONFIDENTIAL]
manuals search engine
HD FPC
PORTEGE R200 Maintenance Manual (960-519)
4.17 HD FPC