Toshiba PORTEGE R200 Maintenance Manual page 272

4 Replacement Procedures
2. Removing screws
CAUTION: Use a Philips screwdriver with type 0 bit to remove the screws.
4-56
Downloaded from www.Manualslib.com
1) Spread out the insulation sheet without detaching from the bezel side, as shown in
the figure below.
2) Remove the left side screw and right side screw as shown in the figure below.
Production label
Figure 4-39 Replacing TMD fluorescent lamp(2)
[CONFIDENTIAL]
manuals search engine
4.27 Fluorescent Lamp
PORTEGE R200 Maintenance Manual (960-519)