Printer Test - Toshiba PORTÉGÉ A600 Maintenance Manual

3.11 Printer Test

3.11 Printer Test
CAUTION: Printer Test is not supported for this model.
To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and
follow the directions on the screen.
NOTE: An IBM compatible printer must be connected to the system to execute this test.
The following message will appear, after selecting the subtest 01 to 03 of the printer test:
The printer I/O port address is specified by the XXXXh number. The computer supports
three printer channels. Select the printer channel number, and press Enter to execute the
selected subtest.
Subtest 01
PORTEGE A600 Maintenance Manual (960-710)
Downloaded from www.Manualslib.com
Also, printer port wraparound connector must be connected.
channel#1 = XXXXh
channel#2 = XXXXh
channel#3 = XXXXh
Select the channel number (1-3) ?
Ripple Pattern
This subtest prints characters for codes 20h through 7Eh line-by-line while
shifting one character to the left at the beginning of each new line.
manuals search engine
3 Tests and Diagnostics
[CONFIDENTIAL] 3-23