Rules List - TP-Link TL-WR841N User Manual

Chapter4 Configure
2. Go to Bandwidth Control > Control Settings.
3. Configure the bandwidth as needed and click Save.
Bandwidth Contrai Settings
Enable Bandwidth Control:
0
Li ne Type:
@
ADSL other
Eoress Ba ndw idth:
l
s12
1
Kbps
lngress Ba ndwidth:
1 2 048 1
Kbps
Save
The values you configure for the Egress Bandwidth and lngress Bandwidth should be
less than 100,000Kbps. For optimal control of the bandwidth, please select the right
Line Type and consult your ISP for the total egress and ingress bandwidth.
• Enable Bandwidth Control - Check this box so that the Bandwidth Control settings
ca n ta ke effect.
• Line Type - Select the right type for you network connection. If you are not sure,
please consult your ISP.
• Egress Bandwidth - The upload speed through the WAN port.
• lngress Bandwidth - The download speed through the WAN port.
4. 12. 2. Rules List
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Bandwidth Control > Ru les List, and you can view and configure the Bandwidth
Control rules.
Bandwidth Contrai Rule List
Descripbon
Egress Bandw1 dlll(Kbps) lngress Bandwidlh(Kbps)
Enable MOOify
Min Max Ma<
The current lis! 1 s empty.
Q dd
Ne·~
Derete
,AJ
Prev ous Next Current No.
o::::::::J
Page
• Description - This is the information about the ru les such as address range.
• Egress Bandwidth - This field displays the max and min upload bandwidth through
the WAN port. The default is O.
• lngress Bandwidth -This field displays the max and min download bandwidth through
the WAN port. The default is O.
• Enable - This field displays the status of the rule.
• Modify - Click Modify/Delete to edit/delete the rule.
52