Rules List - TP-Link TL-WR810N User Manual

Chapter 4
• Line Type - Select the right type for you network connection. If you are not sure,
please consult your ISP.
• Egress Bandwidth - The upload speed through the WAN port.
• Ingress Bandwidth

4. 12. 2. Rules List

1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Bandwidth Control
Control rules.
• Description - This is the information about the rules such as address range.
• Egress Bandwidth - This field displays the max and min upload bandwidth through
the WAN port. The default is 0.
• Ingress Bandwidth
the WAN port. The default is 0.
• Enable - This field displays the status of the rule.
• Modify - Click Modify/Delete
¾ To add a Bandwidth control rule:
1. Click Add New.
2. Enter the information like the figure shown below.
- The download speed through the WAN port.
> Rules List, and you can view and configure the Bandwidth
- This field displays the max and min download bandwidth through
to edit/delete the rule.
Configure the Router in Standard Wireless Router Mode
51