TP-Link TL-WR841N User Manual page 26

300mbps wireless n router
Hide thumbs Also See for TL-WR841N:
Table of Contents

Advertisement

Chapter4
Configure
Ill
Note:
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
Connect Automatically
- The connection can be re-established automatically
when it is down.
Time-based Connecting
-The connection will only be established in the period
from the start time to the end time (both are in HH:MM format).
Connect Manually
- You can click
Connect/Disconnect
to connect/disconnect
immediately. This mode also supports the
Max ldle Time
function as
Connect
on Demand
mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max ldle Ti me) and not be able to re-establish
when you attempt to access the Internet again.
Only when you have configured the system time on the
System Tools
>
Time Settings
page, will the time-based
connecting function take effect.
Sometimes the connection cannot be terminated although you have specified the
Max ldle Time
because some
applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
PPPoE Advanced Settings
MTU
Size
(in
bytes):
~
(The
default
is
1480,
do
not
cha n~e
unless
necessary.)
Service Name:
AC Name:
O
Use
IP Address
Specified
by ISP
ISP Specified
IP Add
ress:
OetectOnline
lnterval:
~
Se<:onds
(0..,
120
setonds,
the defa
ul1is0,
O means
not
detecting
.)
O
Use
The
Fo
llowing
ONS
Servers
PrimaryDNS:
Secondary
ONS:
(Optlonal)
Sav
e
Back
MTU Size
-The default MTU size is 1480 bytes. lt is not recommended that you change
the default MTU size unless required by your ISP.
Service Na me/ AC Name
- The service name and AC (Access Concentrator) name
should not be configured unless you are sure it is necessary for your ISP. ln most cases,
leaving these fields blank will work.
ISP Specified IP Address
- If your ISP does not automatically assign IP addresses to the
router, please select
Use IP address specified by ISP
and enter the IP address provided
by your ISP in dotted-decimal notation.
21

Advertisement

Table of Contents
loading

Table of Contents