TP-Link TL-WR841N User Manual page 71

Chapter4 Configure
Diagnostic Tools
Diagnostic Parameters
Diagnostic Tool:
• Ping
Trace route
IPAddress/Doma in Name:
1 1
Ping Co unt:
14
1(1 -50)
Ping Packet Size:
164
1 (4-1472 Bytes)
Ping Timeout
1
soo
1 (100- 2000 Mil liseco nds)
Traceroute Max TTL:
(1 -30)
Diagnostic Results
!îhi s
devi ce i s ready.
.
.
'"----------------------------------------------------------------------------------·
• Diagnostic Tool - Select one diagnostic tool.
Ping - This diagnostic tool troubleshoots connectivity, reachability, and name
resolution to a given host or gateway.
Tracerouter - This diagnostic tool tests the performance of a connection.
~ Note:
You can use ping/traceroute to test both numeric IP address or domain name. If pinging/tracerouting the IP address
is successful, but pinging/tracerouting the domain name is not, you m ight have a name resolut ion problem. ln this
case, ensure that the domain name you are specifying can be resolved by using Domain Name System (ONS) queries.
• IP Address/Domain Name - Enter the destination IP address (such as 192.168.0.1) or
Domain name (such as www.tp-link.com).
• Pings Count - The number of Ping packets for a Ping connection.
• Ping Packet Size - The size of Ping packet.
• Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no
reply in the specified time, the connection is overtime.
• Traceroute Max TIL - The max number of hops for a Traceroute connection.
3. Click Start to check the connectivity of the Internet.
4. The Diagnostic Results page displays the diagnosis result. If the result is similar to
the following figure, the connectivity of the Internet is fine.
66