TP-Link TL-WR841N User Manual page 81

2 ) Click Save.
1111
Note: Log in to the web management page again if the IP address of the router is altered.
LAN
MAC Address OC-4A-0845~F3~
IPAddress @. 168.0.1
~
Subnet "'4ask
~255.255.0
iJ
IGMP Proxy
~ble
•]
Note.IGMP{lnlemet Group Mana9ement Protocol)wort;s Jor IPlV multicast S tream.The device supports both IGMPproxy wtth
enabledJd1 sabled option and IGMPsnoopmg
Save
3. Survey the SSID to be bridged:
1 ) Go to Wireless
>
Wireless Settings and click Enable WDS Bridging.
2) Click Survey, locate the root router's SSID and click Choose (Here we take
TP-LINK_2512 as example).
3 ) If the root router is set with a wireless password, you should enter the wireless
password of the root router.
4 ) Click Save.
W1 reless Sett1 ngs
Wireless Network Name: - •
1
(Also called the SSID)
::==============----~
4. Disable DHCP:
Mode:
i
11
bgn mixed •
I
Channel Width:
j
Auto •
I
Channel:
1
A uto •
I
SSID (to be bridged):
1
~
Enable Wireless Router Radio
Enab le SSID Broadcast
Enable WDS Bridging
1
BSSID {to be bridged):
1
[
Survey
1 Example:00-1D-OF-11-22-33
'.;::::====--~
WDS Mode:
! A uto
· I
Key type:
! N one
WEPlndex:
11
Auth type:
1
open
Password:
Save
1 ) Go to DHCP, select Disable, and click Save.
-
Now you can go to Status to check the WDS status. When the WDS status is Run, it
means WDS bridging is successfully built.
76