TP-Link TL-WR841N User Manual page 83

1 ) Visit http://tplinkwifi.net, and log in with the username and password you set
for the router.
2) Go to Network > MAC Clone, select Clone MAC Address and click Save.
MAC Clone
-
-
WAN MAC Address:
1
OC-4A-OB-45-F3-61
I[
Restore Factory MAC
l
Your PC's MAC Address:
-
..
[
Clone MAC Address
l
-
(
Save
l
@ Tips:
Sorne ISP will register the MAC address of your computer when you access the Internet for the first time
through their Cable modem, if you add a router into your network to share your Internet connection, the
ISP will not accept it as the MAC address is changed, so we need to clone your computer's MAC address to
the router.
The MAC addresses of a computer in wired connection and wireless connection are different.
• Modify the LAN IP address of the router.
,. Note:
Most TP-LINK routers use 192.168.0.1 /192.168.1.1 as their default LAN IP address, it may conflict with the IP
range of your existent ADSL modem/router. If so, the router is not able to communicate with your modem
and cause you can't access the Internet. To resolve this problem, we need to change the LAN IP address of the
router to avoid such conflict, for example, 192.168.2.1.
1 ) Visit http://tplinkwifi.net, and log in with the username and password you set
for the router.
2 ) Go to Network > LAN.
3) Modifythe LAN IP address as thefollow picture shows. Herewetake 192.168.2.1
as an example.
4 ) Click Save.
LAN
MAC
Aaares.s
OC-4A-08-45-F3-60
IPAddress
1 ' = 1 9= 21= 6 8.= 2 .1 =~
Subnet Mask:
l
255_ 255_ 255_ 0 • ]
IGMP Proxy·
1
E nable •
I
Note:IGMP(lntem el Group Management Pm tocol) w orks for IPTV multJcast streamThe device supports both IGMP proxy witti
e nabledklisabled option <1nd IGMP snoop ing
Save ]
• Restart the modem and the router.
1 ) Power off your modem and the router, and leave them off for 1 minute.
2) Power on your modem first, and wait about 2 minutes.
3) Power on the router, and wait another 1 or 2 minutes and check the Internet
access.
78