TP-Link TL-WR841N User Manual page 84

• Double check the Internet Connection Type.
1 ) Confirm your Internet Connection Type, which can be learned from the ISP.
2)
Visit http://tplinkwifi.net, and log in with the username and password you set
for the router.
3 ) Go ta Network
>
WAN.
4)
Select your WAN Connection Type and
fill
in other parameters.
5 ) Click Save.
WAN
WAN Connection Type:
1
Dynarn ic IP
T 1 [
Detect
~----~
IP Address: 0 .0 .0 .0
Subnet Mask: 0 .0 .0 .0
Default Gateway: 0 .0 .0 .0
Renew Release
MTU Size (in bytes):
l
1soo
1
(The d efault is 1500, do not change unless necessary )
O
Use These ONS Servers
Primary ONS:
Secondary ONS: [ O O
(Optional)
Host Name:
I TL-WR841N
O
Get IP with Unicast DHCP (lt is usually no! required.)
Save
6)
Restart the modem and the router.
• Please upgrade the firmware of the router.
If you've tried every method above but cannot access the Internet, please contact the
technical support.
Q6. What can 1 do if 1 cannot find
my
wireless network or 1 cannot connect
the wireless network?
If
you fail to find any wireless network, please follow the steps below:
• Make sure the wireless function of your device is enabled if you're using a laptop
with a built-in wireless adapter. You can refer ta the relevant document or contact the
laptop manufacturer.
• Make sure the wireless adapter driver is installed successfully and the wireless adapter
is enabled.
79