Backup & Restore; Reboot - TP-Link TL-WR841N User Manual

Chapter4
Factory Defaults
Click the following button to reset all configuration settings to their default values.
[~- R - es- t ore ~
The default Username: admin
The default Password: ad min
The default IP Address: 192.168.0.1
The default Subnet Mask: 255.255.255.0
4. 16. 5. Backup & Restore
Configure
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
>
Backup & Restore.
Backup
&
Restore
Configuration Backup· [ Backup
'=====~-
Configuration Fiie: Browse...
J (
Restore
J
~
To backup configuration settings:
Click Backup to save a copy of the current settings in your local computer. A".bin" file of
the current settings will be stored in your computer.
~
To restore configuration settings:
1. Click Browse ... to locate the backup configuration file stored in your computer, and
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Jiii
Note:
During the restoring process, do not power off or reset the router.
4. 16. 6. Reboot
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
> Reboot, and you can restart your router.
68