Ip&Mac Binding; Binding Settings - TP-Link TL-WR841N User Manual

Chapter4
~
To add a Bandwidth control rule:
1. Click Add New.
2. Enter the information as the figure shown below.
Bandwidlh Control Rule Settings
Enable:
IP Range :
Port Range :
C=:::J -
~I -~
Protoco l:
~
Min Bandwidth (Kbps)
Egress Bandwidth:
1
0
~==~
lngress Bandwidth:
l~ o ---~
Max Bandwidth (Kbps)
1 0
Io
Save ] ( Back
3. Click Save.
4. 13. IP&MAC Binding
Configure
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device's IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the ARP list, but with an unrecognized MAC address.
4. 13. 1. Binding Settings
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to IP & MAC Binding
>
Binding Settings.
3. Select Enable for ARP Binding.
Binding Settings
ARP Binding:
4. Click Save.
Disab le @ Enable
Save
~ To add
IP
& MAC Binding entries:
1. Click Add New.
2. Select the Bind checkbox.
53