Network; Wan - TP-Link TL-WR841N User Manual

Chapter4 Configure
Add A New Device
@
Enter the new device's PIN_
PIN:
l~----~I
Press the button of the new device in Iwo minutes_
Back ] [ Connec! ]
3. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method Three: Enter the Router's PIN
1. Keep the WPS Status as Enabled and get the Current PIN of the router.
WPS (Wi-Fi Protected Setup)
SSID TP-LINK_F360
WPS Status:
Enabled
[~ D ~ isa ~ ble ~ w= p s ~)
Current PIN
80834601 [
Restore PIN
J [
Gen New PIN
J
Disab le PIN of th is device
Adda new device. [ Add
Dev1 ce
J
2. Enter the router's current PIN on your client device to join the router's Wi-Fi network.
4. 3. Network
4.3. 1.
WAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Network
>
WAN.
3. Configure the IP parameters of the LAN and click Save.
Dynamic IP
If your ISP provides the DHCP service, please select Dynamic IP, and the router will
automatically get IP parameters from your ISP.
Click Renew to renew the IP parameters from your ISP.
Click Release to release the IP parameters.
18