Mac Clone; Lan - TP-Link TL-WR841N User Manual

Chapter4 Configure
Il'
Note:
Connect Automatically - The connection can be re-established automatically
when it is down.
Connect Manually - Vou can click Connect/Disconnect to connect/disconnect
immediately. This mode also supports the Max ldle Time function as Connect
on Demand mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max ldle Time) and not be able to re-establish
when you attempt to access the Internet again.
Sometimes the connection cannot be terminated although you have specified the Max ldle Time because some
applications are visiting the Internet continually in the background.
4. 3. 2.
MAC Clone
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Network
>
MAC Clone.
3. Configure the WAN MAC address and click Save.
MAC Clone
WAN MAC Address:
[OC-4A-08-45-F3-61
=-1[
Restore
Fac
tory
MAC J
Your PC's MAC Address:
1 L
aone MAC AddresQ
Save
• WAN MAC Address - This field displays the current MAC address of the WAN port.
If your ISP requires you to register the MAC address, please enter the correct MAC
address in this field. Click Restore Factory MAC to restore the MAC address of WAN
port to the factory default value.
• Your PC's MAC Address -This field displays the MACaddress of the PCthat is managing
the router. If the MAC address is required, you can click Clone MAC Address and this
MAC address will be filled in the WAN MAC Address field.
!!' Note:
• You can only use the MAC Address Clone function for PCs on the LAN.
• If you have changed the WAN MAC address when the WAN connection is PPPoE, it will not take effect until the
connection is re-established.
4. 3. 3. LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to Network
>
LAN.
3. Configure the IP parameters of the LAN and click Save.
26