TP-Link TL-WR841N User Manual page 67

Chapter4 Configure
Secondary ONS - Enter another ONS 1Pv6 address in colon-hexadecimal
notation provided by your ISP.
PPPoEv6
WAN Selup
Enable IP\16:
0
WAN Connection Type:
~I PP - P- o E- " 6-~ •
1
PPPoE Session: Share with PPPoEv4 • Create a new Session
Username:
Password:
Connrm Password:
Address Mode:
1
DHCPv6 •
I
1
Pv6 Add ress:
IP\16 Address Prefix:
Oefa u lt Gateway:
MTU:
~Bytes,1 492
asdefault, do notchange unless necessa ry.
Get IP\16 ONS Server Automatically
Primary IP\16 ONS:
Secondary IP\16 ONS:
Use the following IP\16 ONS Servers
Connection Mode:
Disconnect Disconnected!
PPPoE Session - The PPP session type for 1Pv6 connection. There are two types:
Share with PPPoEv4 - The PPPoEv6 and PPPoEv4 use the sa me PPP session.
Create a new Session - The PPPoEv6 and PPPoEv4 use different PPP
sessions. lt is default to select this option.
Username/Password - Enter the username and password provided by your ISP.
These fields are case-sensitive.
Address Mode - The way to get the 1Pv6 address and prefix.
SLAAC -Get the 1Pv6 address and prefix by router advertisement.
OHCPv6 - Get the 1Pv6 address and prefix by OHCPv6.
1Pv6 Address - The 1Pv6 address assigned by your ISP dynamically.
Oefault Gateway - Display the default gateway in colon-hexadecimal notation
provided by your ISP.
MTU (in bytes) - The normal MTU (Maximum Transmission Unit) value is 1492
Bytes. For some ISPs, you may need to modify the MTU. But this is rarely
required, and should not be done unless you are sure it is necessary for your
ISP connection.
Get 1Pv6 ONS Server Automatically - If your ISP does not give you any ONS 1Pv6
address, keep the default selection Get 1Pv6 ONS Server Automatically, and the
ONS servers will be assigned from ISP dynamically.
62