Detaching And Refitting The Press Roller - Kyocera FS-6970DN Service Manual

2J5

(4) Detaching and refitting the press roller

Procedure
1. Remove the fuser unit (See page P.1-5-16).
2. Open the fuser unit (See page P.1-5-17).
3. Remove the press roller from the fuser lower
frame.
4. Remove two bearings.
5. Check or replace the press roller and refit all
the removed parts.
1-5-20
Bearing
Press roller
Fuser lower frame
Figure 1-5-27
Bearing