Selecting Registrations; Saving The Registration Data To Disk - Yamaha Electone EL-500 Owner's Manual

NOTE:
6
See pages 93 and 94 for the details on
saving/recalling registrations to/from
the M.D.R.
NOTE:
No song names will be provided for the
songs recorded by the other Electone
models.
NOTE:
You can freely name the songs you
have recorded. See page 89 for the
details.
2

Selecting Registrations

Simply press the numbered button that corresponds to the registration
you wish to select.
Using the D (Disable) button:
Rhythm and automatic accompaniment patterns also change when you
select different Registration Memory buttons. Pressing the D (Disable)
button allows you to keep the same rhythm and accompaniment patterns
throughout all your registration changes, or make your own rhythm
selections if you want to.
3

Saving the Registration Data to Disk

1
Insert a formatted disk into the disk slot under the Music Disk
Recorder (M.D.R.).
Make certain that the disk is either blank or has data you can erase.
If the disk is new and unformatted, you will have to format it. Refer
to the instructions how to format a disk (page 86).
2
Select a song number on the M.D.R. using the SONG SELECT
buttons. You can also select a song number shown on the display
using the appropriate Data Control button and (if necessary) using
Page buttons to display the appropriate page. A song name is
displayed next to the song number which already contains data.
RECORD
UPPER LOWER PEDAL
SONG FROM
REPEAT SONG COPY
PAUSE STOP
MUSIC DISK RECORDER
There are 40 songs (ten song numbers on the four pages), or
memory locations, available on a single disk.
78
PLAY
CONTROL UPPER LOWER PEDAL CONTROL
TO SONG DEL.
01
PLAY SONG SELECT RECORD
– TEMPO + FORMAT
SHIFT
CUSTOM PLAY