Table of Contents
Advertisement
Other Settings
1. Setting an ID Name
An ID name is a name that can be assigned to each memory channel by entering it directly using keys.
When measurement is performed, the ID name is displayed together with the memory channel no. and probe no. in
the LCD display section.
• Number of characters you can enter ................. Up to 10 characters
• Type of characters you can enter ....................... "1" to "9", "." (comma), "A" to "Z", "—", " " (space)
For instance, if you set "EXT D-1.50" for CH01, the LCD display section
will look like the one shown on the right.
This function is useful when you want to specify that user calibration and
target color have been set for what type of display with what colors.
[Operating Procedure]
1
.
Press the MEMORY CH
the memory channel to which you want to set an
ID name appears.
2
.
Press the
key.
The LCD display section will switch to the menu selection screen.
3
.
Press the
key to open the ID name input screen.
Each time the
order PROBE → SYNC → ID Name input → RANGE → Mea-
surement Speed → Number of Digits → Calibration Standard→
RS232C Baud Rate → PROBE.
4
.
Enter the desired ID name.
Number-key (
key ................................................ The
key ................................................ Moves the cursor to the right each time this key is pressed.
and
key is pressed, the screen will switch in the
to
,
) ............. Used to enter values. (The cursor moves to the right each time a
value is entered.)
alphabet, hyphen (-) and space. Pressing this key again will restore
the original function of the number-key.
CH01 EXT
keys until
Memory channel
CH01 EXT
MENU : SELECT
PUSH SPACE KEY
CH01 EXT
to
and
keys on the key panel can be used to enter an
67
67
Probe no.
Memory channel
Ad P1A
Probe type
[EXT D-1.50]
ID name
Ad P1A
[
]
Ad P1
[
]
_
Hide quick links:
Advertisement
Table of Contents
