Selecting The Number Of Display Digits - Konica Minolta CA-310 Instruction Manual

4. Selecting the Number of Display Digits

The number of display digits can be selected from 4 or 3.
However, T(correlated color temperature) is always displayed in three digits, and flicker is always displayed up to
the first decimal place.
[Selecting Method]
1
. Press the
The LCD display will switch to the menu selection
screen.
2
. Press the
display digits selection screen.
Each time the
in the order PROBE → SYNC → ID Name input →
RANGE → Measurement Speed → Number of Digits
→ Calibration standard→ RS232C Baud Rate →
PROBE.
3
. Press the
of display digits appears.
Each time the
play digits switches alternately between "4 FIGURES"
and "3 FIGURES".
4
. Press the
* By default (factory setting), the instrument is set so that "4 FIGURES"
will be selected automatically when the POWER switch is set to ON( | ).
* To cancel selection of the number of display digits, press
<Notes on Number of Display Digits Setting>
● The selected number of display digits will be kept even if the POWER switch is set to OFF(●).
The selected number of display digits will be effective when the POWER switch is set to ON( | ).
key.
key to open the number of
key is pressed, the screen will switch
key until the desired number
key is pressed, the number of dis-
key to confirm the selection.
PQRS TUV
7 8
GHI JKL
4 5
White ABC
1 2
Red Green
0 .
Menu selection screen
MENU : SELECT
PUSH SPACE KEY
Number of display digits
selection screen
SELECT : DISP.
4 FIGURES
SELECT : DISP.
3 FIGURES
key.
42 42
WXYZ
1
9
MENU
MNO LOCK
6
ALPHA
DEF - SPACE
2
3
CAL
3
Blue
4
ENTER
Press the
the desired number of
display digits appears.
key until