The second digit flashes.
Use the 'Up' and 'Down' keys to se-
7
lect a value for the second digit.
Press the 'Enter' key.
8
The number of solar modules strings con-
nected to measuring channel 1 flashes.
Press the 'Enter' key.
9
The 'Config. Channel #1' parameter is dis-
played.
Use the 'Down' key to select the 'Con-
10
fig. Channel #2' parameter.
Press the 'Enter' key.
11
'Channel #2' is displayed, the first digit of
the currently set value flashes.
Use the 'Up' and 'Down' keys to se-
12
lect a value for the first digit.
Press the 'Enter' key.
13
89