Fronius IG-TL 3.0 Operating Instructions Manual page 89

NOTE! If a logging interval for recording data has been set, then the inverter be-
gins recording data again after the 'Ok mode' has been confirmed.
'Ok' is displayed.
Make sure that the 'Data Transfer'
6
LED on the data communication rack
is no longer flashing or lit.
Remove the USB stick.
7
Insert (new) USB stick.
8
Confirm 'Ok mode' by pressing
9
'Back.'
'Disconnect Device' is displayed.
Press the 'Back' key.
10
The 'USB' menu item is displayed.
87