Display; Symbols For Function Key Functions - Fronius IG-TL 3.0 Operating Instructions Manual

Display

Power for the display comes from the AC grid voltage. The display can be available all day
long depending on the setting in the Setup menu.
IMPORTANT! The inverter display is not a calibrated measuring instrument. Slight devia-
tion of a few percentage points from the utility company meter is intrinsic to the system. A
calibrated meter is required to make calculations for the utility company.
Display area, display mode
(*)
Display area, setup mode
(*)
(**)
Symbols for func- The following symbols are shown on the display for function key assignment:
tion key functions
60
Scroll bars
Inverter no. = inverter DATCOM number,
USB connection - appears if a USB stick was connected,
storage symbol - appears briefly when set values are stored
Navigation: Left
Navigation: Up
Increase value
Navigation: Right
Navigation: Down
Reduce value
Menu / Back
Enter
Display modes
Parameter explanation
Display of values and units as well as
status codes
Function key assignment
Inverter no. | USB conn. | Storage sym. (**)
1
Display modes
Preceding menu items
Currently selected menu item
Next menu items
Function key assignment