Screen Control - Honeywell Thor VM3 User Manual

5. The uninstallation process continues. This process may require several minutes. Tap
6. If prompted to restart, close any work and select Restart now for the changes to take

Screen Control

(Start) > Control Panel > Screen (Classic View)
Set screen properties for the Thor VM3.
Factory Default Settings
Automatic Brightness Control
(for outdoor display only)
Enable automatic brightness control
Low to medium light level (%)
Medium to high light level (%)
Current Level
LCD Brightness (%)
Defroster Control
Enable defroster
Trip point (ºC)
Note: If automatic brightness control is enabled for an outdoor display, the value for LCD
brightness depends on the Ambient Light %.
Note: There is no default value for Ambient Light % as it varies depending on the level of light
where the Thor VM3 is located.
172 Thor VM3 with Microsoft Windows 7 or Windows Embedded Standard 7 User Guide
Next when the installation completes.
effect.
Disabled
25
75
100 (see note)
Enabled
40ºC