10: Annunciators; 11: Phone Line - Fire-Lite MS-9600LS Manual

Addressable fire alarm control panel
Table of Contents

Advertisement

Operating Instructions
4.23.10 Annunciators
Pressing 1 while viewing Read Status Screen #4 will display the following screens:
READ STATUS
1=ANNUNCIATORS
2=PHONE LINES
3=CENTRAL STATION
Read Status Screen #4
The Annunciator Screen indicates if Terminal mode options are enabled or disabled.
Pressing 2 for ACS Options while viewing the Annunciator Screen allows the operator to view the
ACS Options screen:
The ACS Options screen indicates if the ACS option has been enabled YES or disabled NO.
Pressing 2 for ACS Addresses while viewing the ACS Options screen will display screens with
ACS addresses 1 -31 and whether a device is installed at that address YES or not installed NO.
The ACS Options screen indicates if a UDACT is installed YES or if a UDACT is not installed NO.
Pressing 3 for ANN-BUS Options while viewing the Annunciator Screen will display the following
screens:
The ANN-BUS Screen #1 indicates if the ANN-BUS has been enabled YES or disabled NO.
Pressing 2 for Modules Installed while viewing ANN-BUS Screen #1 will display screens for
ANN-BUS Addresses 1 -8 and the devices installed at each address. Subscreens will display the
options that have been programmed for each device.
Pressing 3 for ANN-S/PG Options while viewing ANN-BUS Screen #1 will display the options
selected for the installed serial or parallel printer.
Pressing 1 for ANN-80 Options while viewing ANN-BUS Screen #2 will display the options
selected for the installed ANN-80 annunciators.
4.23.11 Phone Line
Pressing 2 while viewing Read Status Screen #4 will display the following screen:
The second and third lines of this screen indicate that both the Primary and Secondary phone lines
have been configured for touchtone dialing operation.
Pressing 3 while viewing the Phone Line screen will cause the following screen to be displayed:
142
TERM ENABLED
2=ACS OPTIONS
3=ANN-BUS OPTIONS
ACS ENABLED
2=ACS ADDRESSES
UDACT ENABLED
ANN-BUS
ENABLED
NO
2=MODULES INSTALLED
3=ANN-S/PG OPTIONS
ANN-BUS Screen #1
PRIMARY
SECONDARY TOUCHTONE
3=SUPERV PHONE LINE
SUPERVISE PHONE LINE
PHONE LINE 2
ANNUNCIATORS
YES
Annunciator Screen
ACS OPTIONS
NO
NO
ACS Options Screen
ANN-BUS
1=ANN-80 OPTIONS
ANN-BUS Screen #2
PHONE LINE
TOUCHTONE
NO
MS-9600LS Series Manual — P/N 52646:B8 11/20/2015
Read Status

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms-9600lseMs-9600udlsMs-9600udlseMs-9600lsc

Table of Contents