Functional Diagrams For Control And Interlocking - ABB REF615 Applications Manual
Feeder protection and control
Hide thumbs
Also See for REF615:
- Applications manual (404 pages) ,
- Operation manual (126 pages) ,
- Product manual (57 pages)
Table of Contents
Advertisement
Section 3
REF615 variants
3.8.3.3
104
GUID-F06A3FEF-2C72-49A4-928F-D301335EC2C6 V1 EN
Figure 58:
Trip circuit supervision
Functional diagrams for control and interlocking
The operate signals from the protections are connected to the two trip output contacts
PO3 (X100:16-19) and PO4 (X100:20-23) via the corresponding Master Trips
TRPPTRC1 and TRPPTRC2. Open control commands to the circuit breaker from
local or remote CBXCBR1-exe_op or from the auto-recloser DARREC1-open_cb
are connected directly to the output PO3 (X100:16-19).
The TRPPTRC1 and TRPPTRC2 blocks provide the lockout/latching function, event
generation and trip signal duration setting. If the lockout operation mode is selected,
one binary input can be re-assigned to the RST_LKOUT input of the Master Trip to
enable external reset with a push button.
1MRS756378 D
REF615
Application Manual
Advertisement
Table of Contents
