Table of Contents
Advertisement
10 Safety instructions
Obey all safety regulations required with application of Ex motors in Zone 1/21
(equipment category 2) or Zone 2/22 (equipment category 2 or 3).
Instructions for functional safety circuits
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur. If you are not a qualified
electrical professional, do not do installation, commissioning or
maintenance work.
This manual does not contain the complete safety instructions of the drive. It only
includes the instructions related to the scope of this manual. The general instructions
are given in this section and the option-specific instructions in the applicable chapter.
In addition to this manual:
•
for ACS880 single drives, see the drive hardware manual
•
for ACS880 air-cooled multidrives, multidrive modules and single drive modules,
see
ACS880 multidrive cabinets and modules safety instructions (3AUA0000102301
[English])
•
for ACS880 liquid-cooled multidrives, multidrive modules and single drive modules,
see
ACS880 liquid-cooled multidrive cabinets and modules safety instructions
(3AXD50000048633
WARNING!
The safety function described in this manual does not isolate the main circuit
or auxiliary circuit from the power supply. Do not do work on the drive, motor
cable or motor before you have isolated the drive system from all power supplies
and measured that there are no dangerous voltages. Before you start the work,
do the electrical safety precautions in the drive safety instructions.
[English]).
Advertisement
Table of Contents
