Theory of Operation
Analyzer System Operation
Analyzer System Operation
The N9923A RF vector network analyzer operates as either a 1-port or 2-port
network analyzer (NA). One port measurements are made using PORT 1 and
two port measurements are made using both PORT 1 and PORT 2.
The NA function of the analyzer also supports cable and antenna test (CAT)
functions.
See
system.
All N9923A RF vector network analyzers have the same hardware. Options to
increase functionality are enabled via licenses, additional hardware is not
required.
Functional Groups of the Analyzer
The operation of the analyzer can be separated into two major functional
groups. Each group consists of assemblies that perform distinct functions.
Some of the assemblies are related to more than one group, and both groups,
to some extent, are interrelated and affect each other's performance.
The major functional groups are:
—
—
Front Panel Group
The front panel group consists of the following:
—
—
Measurement Group
The measurement group consists of the following:
—
—
—
—
5-2
Figure 5-1
for a simplified block diagram of the overall RF analyzer
Front Panel Group
Measurement Group
A2 LCD Assembly
A3 Front Panel Interface Board
A4 RF Board
A5 System Board
A6 SOM Board
Main Battery
Keysight N9923A Service Guide