Troubleshooting & Maintenance; Rear Stabilizer 1 - Ironman Fitness 6100.4-061716 Owner's Manual

TROUBLESHOOTING & MAINTENANCE
TROUBLESHOOTING
Computer not working correctly
 Check that the computer cables are connected securely and are not
damaged.
 Check that the AC Adaptor (29) is securely connected to the Power Jack (28)
and plugged into an electrical outlet.
The bike wobbles or shakes when in use
 Turn the adjustable levelers on the rear stabilizer to level the bike.
Squeaking noise when in use
 There may be loose bolts on the bike, inspect all the bolts and tighten as
needed.
No readings or inconsistent/erratic heart rate readings
 Always hold on to the handlebar grip sensors with both hands.
 Try to maintain moderate pressure while holding onto the hand pulse
sensors.
 Make sure that the wire connections for the hand pulse Sensor Wires (25) are
plugged in and secured.
 Wipe excess moisture off of your hands.
Problem Potential Cause
E1 1. The motor does not
activate
Problem Potential Cause
E2 1. There is something
wrong with the cables.
2. There is something
wrong with the computer.
3. There is something
wrong with the motor.
Correction
1) Motor Problems
Symptoms include an unusually loud noise
coming from the Motor, which means the
Gears are NOT meshing correctly. Try
reversing the resistance and try again. If
this fails then contact customer service.
Correction
Check if the cables are damaged or not
to cause circuit short.
Change the computer. contact customer
service
Change the motor. contact customer
service
20