Front Post ( - Ironman Fitness 6100.4-061716 Owner's Manual

ASSEMBLY
6mm Allen Wrench
1PC
5. Handlebar Installation
Remove four Hex Bolts (20), four Spring Washers (21) and four Flat Washers (19)
from the sides of the Front Post (2). Feed the Sensor Wires (25) into the hole on
the Front Post (2) as shown in Fig. AA-2. Pull the sensor Wires (25) out from the
large hole at the top of the Front Post (2) and leave them hanging outside of the
Front Post (2) for the moment. Attach the Handlebar (3) onto the Front Post (2)
with four Hex Bolts (20), four Spring Washers (21) and four Flat Washers (19).
Tighten the Hex Bolts (20) with the 6 mm Allen Wrench (31) provided.
12