Table of Contents
Advertisement
TROUBLE SHOOT & MAINTENANCE
TROUBLESHOOTING
Computer not working correctly
Check to make sure the computer cable is connected securely.
The bike wobbles or shakes when in use
Turn the adjustable leveler on the front stabilizer or rear stabilizer as needed to
level the bike.
Squeaking noise when in use
The bolts may be loose on the bike. Inspect all bolts and tighten as needed.
No readings or inconsistent/erratic heart rate readings
Before wearing, try adding a few drops of water to the sensor strips of the chest belt.
MAINTENANCE
Cleaning
The bike trainer can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Wipe your perspiration off the bike trainer
after each use. Be careful not to get excessive moisture on the computer display
panel as this might cause an electrical hazard or electronics to fail. Keep the bike
trainer, especially the computer console, out of direct sunlight to prevent screen
damage or premature wear. Inspect all assembly bolts and pedals on the machine
for proper tightness every week.
Storage
Store the bike trainer in a clean and dry environment away from children.
Thread sealant instruction
must be cleaned before applying. It needs at least 12 hours to a day to wait the
sealant dry, do not
use the bike until the thread sealant is fully dry.
20
Advertisement
Table of Contents
