Main Frame ( - Ironman Fitness 6100.4-061716 Owner's Manual

ASSEMBLY
6mm Allen Wrench
1PC
`
4. Front Post Installation
Remove six Hex Bolts (20), six Spring Washers (21), two Curved Washers (22), and
four Flat Washers (19) from the Main Frame (1). Connect the Lower Console Wire (23)
from the Main Frame (1) and Upper Console Wire (24) from the Front Post (2), as
shown in Fig. AA-1. Slide the Front Post (2) down onto the Main Frame (1), being
careful to not pinch or damage the wires. On the sides of the Front Post (2) install four
Hex Bolts (20), four Spring Washers, and four Flat Washers by hand. Then install two
Hex Bolts (20), two Spring Washers (21), and two Curved Washers (22) into the front
and Back side of the Front Post (2) by hand. Once all the hardware has been installed
tighten the Hex Bolts (20) with the 6mm Allen Wrench (31) provided.
11