Table of Contents
Advertisement
ADJUSTMENTS
Seat Post Adjustment
Loosen Adjustment Knob (13) by first twisting
. When loosen, the
counter clockwise
Adjustment Knob (13) can be pull out slightly to release the Seat Post (4), allowing it to slide up
and down. Release the Adjustment Knob (13) at the desired height, allowing it to pop into one of
the nearest available holes. Shift the Seat Post (4) up and down slightly to make sure it has
"popped" into a hole. Tighten the Adjustment Knob (13) by turning it
in order to
clockwise
secure Seat Post (4) height.
Floor Level Adjustment
Turn the dials in the Rear Stabilizer End Caps (45) at both sides of the Rear
Stabilizer (6) to level the bike with the floor. It is very important that all Front /Rear
Stabilizer End Caps (34) & (45) on the front and rear stabilizer make contact with
the floor.
18
Advertisement
Table of Contents
