Erase Lamp Replacement - Ricoh FT2050 Field Service Manual

August 1, 1985

Erase Lamp Replacement

1. Open the clamshell and remove the upper
right cover.
2. Pull the master release hook and remove the
master unit.
CAUTION: * Do not touch the master belt (purple
material), and avoid exposing it to
light.
NOTE: * When installing the master unit,
sure that the master rides in the
rails.
Remove one screw and one connector.
3.
4. Slide the erase lamp unit to the rear and
remove by turning its front end counterclock-
wise.
5-6
make
guide