Installation Guide; Introduction; Included In The Package - Autostart AS-1414 Installation Manual

Introduction

This guidebook contains all information pertinent to the installation. Most (if not all) features
are grouped in the user guidebook and therefore, should you need information on a feature,
you should refer to the user guidebook.

Included in the Package

Before beginning the installation, please review the installation guide – especially the wiring
diagram and the programming options.
It is very important that you familiarize yourself with the programming and operation of the
system, even if you have already installed such a system in the past. There are many great
new features that may be overlooked if you do not read the manual; this would prevent you
from maximizing the potential of the Module.
Prior to the installation, make sure that all the hardware components required to install the
system are in the box.
The following is a list of components included in the kit:
1 – Control unit
1 – 4-button remote transmitter
(AS-1414 Only)
2 – 4-button remote transmitters
(AS-1424 Only)
1 – R-1 interconnect cable
1 – R-1 receiver
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device. To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more
than that required for successful communication".
FCC USER NOTICE (U.S.A.):
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user's authority to
operate the equipment.
P. 2
1 – Hood pin switch
1 – 6 Pin main ignition harness
1 – 5 Pin secondary harness
1 – 12 Pin accessories harness
1 – Warning label, user guide
The plug-in valet is not included..
AS-1414/ AS-1424

Installation Guide