Parker 514C-04 Technical Manual page 41

Certificates
Issued for
In accordance with the EU Directive
compliance
with the EMC
Directive when
We Parker Hannifin Manufacturing Limited,
the unit is used
address as below, declare under our sole
as relevant
responsibility that the above Electronic
Products when installed and operated with
apparatus.
reference to the instructions in the Product
Manual (provided with each piece of
equipment) is in accordance with the relevant
clauses from the following standard:-
This is We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
provided to aid
responsibility that the above Electronic
your
Products when installed and operated with
justification for
reference to the instructions in the Product
EMC
Manual (provided with each piece of
compliance
equipment) is in accordance with the relevant
when the unit
clauses from the following standard:-
is used as a
component.
*.
* Compliant with the immunity requirements of the Standard without specified EMC filters.
Parker Hannifin Manufacturing Limited, Automation Group,
Electromechanical Drives Business Unit,
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000
Registered Number: 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
514C Product Manual
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com
EU D
ECLARATIONS OF
Date CE marked first applied: 01.04.2000
EMC Directive
2014/30/EU
* BSEN61800-3 (2004)
M
ANUFACTURERS
EMC Declaration
* BSEN61800-3 (2004)
Dr Martin Payn (
514C
C
ONFORMITY
Low Voltage Directive
In accordance with the EU Directive
2014/35/EU
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual
(provided with each piece of equipment), is in
accordance with the relevant clauses from the
following standard :-
EN50178 (1998)
D
ECLARATIONS
Machinery Directive
The above Electronic Products
are components to be incorporated into
machinery and may not be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
2006/42/EC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
01 June 16
EME Division Engineering Manager)
FAX: +44(0)1903 737100
6-3
Certification
The drive is CE
marked in
accordance with
the low voltage
directive for
electrical
equipment and
appliances in the
voltage range
when installed
correctly.
Since the
potential hazards
are mainly
electrical rather
than mechanical,
the drive does not
fall under the
machinery
directive.
However, we do
supply a
manufacturer's
declaration for
when the drive is
used (as a
component) in
machinery.